- Home
- Engineering
- Maximum power point tracking.......saq

Published on

15-Jul-2015View

954Download

4

Transcript

<p>MAXIMUM POWER POINT TRACKING</p>
<p>Presented byMD SAQUIB MAQSOODREGD NO. 0901292238ELECTRICAL & ELECTRONICS ENGINEERINGMAXIMUM POWER POINT TRACKING..1MAXIMUM POWER POINT TRACKING FOR PHOTOVOLTAIC SYSTEM</p>
<p>2 INTRODUCTION MATHEMATICAL MODEL WHAT IS MPPT HOW IT WORKS MPPT TECHNIQUES SYSTEM MODELING ADVANTAGES CONCLUSION</p>
<p>CONTENTS3PV modules still have relatively low conversion efficiency; therefore, controlling maximum power point tracking (MPPT) for the solar array is essential in a PV system. The amount of power generated by a PV depends on the operating voltage of the array. A PVs maximum power point (MPP) varies with solar insulation and temperature.INTRODUCTION4MPPT or Maximum Power Point Tracking is algorithm that included in charge controllers used for extracting maximum available power from PV module under certain conditions. The voltage at which PV module can produce maximum power is called maximum power point (or peak power voltage). WHAT IS MPPT?5Equivalent circuit of solar PV array.MATHEMATICAL MODEL:</p>
<p>6I= Isc Io{exp[ q(V + RsI)/(nkTk) ]- 1} (V+RsI)/Rsh ..(1) </p>
<p> Where , Isc = Id + I The above equation is used in computer simulations to obtain the o/p characteristics of a solar cell.7Output characteristics of a solar cell are non- linear and are crucially influenced by a solar radiation, temperature and load condition. V-I and V-P characteristics of a solar cell:</p>
<p>8The major principle of MPPT is to extract the maximum available power from PV module by making them operate at the most efficient voltage (maximum power point). MPPT checks output of PV module, compares it to battery voltage then fixes what is the best power that PV module can produce to charge the battery and converts it to the best voltage to get maximum current into battery. </p>
<p>How MPPT works?MPPT is most effective under these conditions: Cold weather, cloudy or hazy days: Normally, PV module works better at cold temperatures and MPPT is utilized to extract maximum power available from them.When battery is deeply discharged: MPPT can extract more current and charge the battery if the state of charge in the battery is lowers.9A MPPT solar charge controller is the charge controller embedded with MPPT algorithm to maximize the amount of current going into the battery from PV module.MPPT is DC to DC converter which operates by taking DC input from PV module, changing it to AC and converting it back to a different DC voltage and current to exactly match the PV module to the battery.Examples of DC to DC converter are Boost converter Buck converterMPPT algorithm can be applied to both of them depending on system design.MPPT solar charge controller:</p>
<p>10MPPT solar charge controllers are useful for off-grid solar power systems such as stand-alone solar power system, solar home system and solar water pump system, etc.</p>
<p>MPPT solar charge controllers11General configuration of the MPPT solar charge controller</p>
<p>OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOPV INPUTDC LoadINVERTERAC Load12 MPPT TECHNIQUES: Fractional Open-Circuit Voltage Fractional Short-Circuit Current Perturb and Observe Incremental Conductance</p>
<p>13Fractional Open-Circuit Voltage: VMPP k1 VOC .(2)Factor k1 has been reported to be between 0.71 and 0.78.</p>
<p>Implementation of this method is simple.</p>
<p>Its tracking efficiency is relatively low.14Fractional Short-Circuit Current: IMPP k2 ISC (3)k2 is not constant. It is found to be between 0.78 and 0.92.The accuracy of the method and tracking efficiency depends on the accuracy of K2 and periodic measurement of short circuit current.15Perturb and Observe:The concept behind the P&O method is to modify the operating voltage or current of the PV panel until you obtain maximum power from it.The tracker operates by periodically incrementing or decrementing the solar array voltage.If increasing the voltage to a panel increases the power output of the panel, the system continues increasing the operating voltage until the power output begins to decrease.</p>
<p>16</p>
<p>Flowchart for P&O algorithm17Incremental Conductance:Incremental conductance considers the fact that the slope of the power-voltage curve is zero at the maximum power point, positive at the left of the MPP, and negative at the right of the MPP.</p>
<p> I/V = - I/V , at MPP I/V > - I/V , left of MPP I/V < - I/V , right of MPP</p>
<p>18Flowchart of incremental conductance</p>
<p>19SYSTEM MODELING:The PV power system is modeled using Power System Blockset under Matlab.</p>
<p>20</p>
<p>Solar Panel21</p>
<p>Digital ControllerThe microcontroller provides the control in our system. The choice of microcontroller for the system dictates much of the cost, performance, and flexibility of the entire system. 22</p>
<p>Circuits of the boost converterDC-DC Converter23</p>
<p>24ADVANTAGES:MPPT method can extract maximum available power from the PV module.</p>
<p>This can increase the tracking efficiency.</p>
<p>If your energy use is greatest in the winter (typical in most homes) and you have cold winter weather, then you can gain a substantial boost in energy when you need it the most!</p>
<p>25CONCLUSION:A PV systems are suitable for residential and/or industrial applications as it provides a regulated AC output voltage that may also track the input mains utility voltage in phase and amplitude at hundreds to thousands of watts. Thus MPPT system can be deployed to get maximum amount of power to take advantage of solar energy.26REFERENCES:N. Femia, et. Al. Optimization of Perturb and observe Maximum Power Point tracking Method, IEEE Trans. Power Electron., Vol. 20, pp. 963-973, July 2005.E. Koutroulis; et. al , Development of a Microcontroller-based Photovoltaic maximum power tracking control system, IEEE Trans. On power Electron., Vol. 16, No. 1, pp. 46-54, 2001. J .A.Jiang et. Al. , Maximum Power Tracking for Photovoltaic Power Systems, Tamkang Journal of Science and Engineering, Vol. 8, No. 2, pp. 147-153, 2005. S. Jain and V. Agarwal, A New Algorithm for Rapid Tracking of Approximate Maximum Power Point in Photovoltaic Systems, IEEE Power Electronic Letter., Vol. 2, pp. 16-19, Mar. 2004. W. Xiao and W. G. Dunford,A modified adaptive hill climbing MPPT method for photovoltaic power systems, 35th. Annual IEEE Power Electron. Specialists Conf. , pp. 1957-1963, 2004. Y. Kuo, et. Al., Maximum power point tracking controller for photovoltaic energy conversion system, IEEE Trans. Ind. Electron., Vol. 48, pp. 594-601, 2001.27...:THANK YOU:.....???????????28</p>