Wiring Harness Connector ZF4HP16

  • Published on
    19-Feb-2016

  • View
    42

  • Download
    2

DESCRIPTION

Pinout conector caja automatica ZF4HP16

Transcript

<p>Wiring harness connector</p> <p>1Transaxle output speed sensor (+)</p> <p>2Transaxle output speed sensor (-)</p> <p>3Solenoid valve (+)</p> <p>4Transaxle temperature sensor (-)</p> <p>5Pressure control valve solenoid vlave (+)</p> <p>6Pressure control valve solenoid vlave (EDS3)</p> <p>7Pressure control valve solenoid vlave (EDS4)</p> <p>8Not used</p> <p>9Transaxle temperature sensor (+)</p> <p>10Pressure control valve solenoid vlave (EDS5)</p> <p>11Pressure control valve solenoid vlave (EDS6)</p> <p>12Solenoid valve 1</p> <p>13Solenoid valve 2</p> <p>14Not used</p> <p>15Transaxle output speed sensor (-)</p> <p>16Transaxle output speed sensor (-)</p> <p>ComponentPassThroughPinsResistance20C (68F)OhmsResistance 140C(212F) Ohms</p> <p>Solenoid 13, 1226.50.526-345 (not relative to emperature)</p> <p>Solenoid 23, 1326.50.526-345 (not relative to emperature)</p> <p>Pressure control solenoid valve (EDS3)5, 65.70.455.3-6.3 (not relative to emperature)</p> <p>Pressure control solenoid valve (EDS4)5, 75.70.455.3-6.3 (not relative to emperature)</p> <p>Pressure control solenoid valve (EDS5)5, 105.70.455.3-6.3 (not relative to emperature)</p> <p>Pressure control solenoid valve (EDS6)5, 115.70.455.3-6.3 (not relative to emperature)</p> <p>Transaxle temperature sensor*4, 9980-1,000</p> <p>Transaxle input speed sensor15, 168305788-871 (not relative to emperature)</p> <p>Transaxle output speed sensor*1, 2</p> <p>* The resistance of the transaxle is necessarily dependent on the temperature.</p> <p>DIAGNOSTIC TROUBLE CODE DIAGNOSISDIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION DTCDescriptionIndicationDefault Action</p> <p>P0705Park/Neutral Position SwitchMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON : 3rd gear by hydraulic control, position P, R and N also possible.</p> <p>P0715 Input Speed Sensor Circuit MalfunctionMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON : 3rd gear by hydraulic control, position P, R and N also possible. Open lock up clutch.</p> <p>P0716 Input Speed Sensor Circuit Range/PerformanceMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON : 3rd gear by hydraulic control, position P, R and N also possible. Open lock up clutch.</p> <p>P0717 Input Speed Sensor Circuit No SignalMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON : 3rd gear by hydraulic control, position P, R and N also possible. Open lock up clutch.</p> <p>P0720Output Speed Sensor Circuit MalfunctionMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/ Substitute mode and constant 4th gear. Open lock up clutch.</p> <p>P0721Output Speed Sensor Circuit Range/PerformanceMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/ Substitute mode and constant 4th gear. Open lock up clutch.</p> <p>P0722 Output Speed Sensor Circuit No SignalMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Vehicle running remains actual gear. Open lock up clutch.</p> <p>P1839EDS3 Output Shortage To GroundMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. Power supply cut OFF to the EDS valve.</p> <p>P1840 EDS3 output shortage to batteryMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. Power supply cut OFF to the EDS valve.</p> <p>P1841EDS3 output openMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. Power supply cut OFF to the EDS valve.</p> <p>P1850Solenoid 1 Output Shortage To GroundMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. After ignition OFF/ON : 3rd gear by hydraulic control. Possible P, R and N also possible.</p> <p>P1851Solenoid 1 Output Shortage To BatteryPower Lamp Flashing Power lamp will blink. The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.</p> <p>P1852Solenoid 1 Output OpenMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. After ignition OFF/ON : 3rd gear by hydraulic control. Possible P, R and N also possible.</p> <p>P1853Solenoid 2 Output Shortage ToGroundMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. After ignition OFF/ON : 3rd gear by hydraulic control. Possible P, R and N also possible.</p> <p>P1854Solenoid 2 Output Shortage To BatteryMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. After ignition OFF/ON : 3rd gear by hydraulic control. Possible P, R and N also possible.</p> <p>P1855Solenoid 2 Output OpenMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. After ignition OFF/ON : 3rd gear by hydraulic control. Possible P, R and N also possible.</p> <p>P1861 EDS4 Output Shortage To GroundMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. Power supply cut OFF to the EDS valve.</p> <p>P1862 EDS4 output shortage to batteryMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. Power supply cut OFF to the EDS valve.</p> <p>P1863EDS4 output openMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. Power supply cut OFF to the EDS valve.</p> <p>P1864EDS5 Output Shortage To GroundMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. Power supply cut OFF to the EDS valve.</p> <p>P1865EDS5 Output Shortage To BatteryMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. Power supply cut OFF to the EDS valve.</p> <p>P1866EDS5 Output OpenMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. Power supply cut OFF to the EDS valve.</p> <p>P1867EDS6 Output Shortage To GroundMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. Power supply cut OFF to the EDS valve.</p> <p>P1868 EDS6 Output Shortage To BatteryMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. Power supply cut OFF to the EDS valve.</p> <p>P1869EDS6 Output OpenMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. Power supply cut OFF to the EDS valve.</p> <p>P1871 EDS Valve Power Supply Circuit Shortage To BatteryMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. After ignition LOCK/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. Power supply cut OFF to the EDS valve.</p> <p>P1874 Solenoid Valve Power Supply Circuit Shortage To BatteryMIL ON The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. After ignition OFF/ON : 3rd gear by hydraulic control. Possible P, R and N also possible.</p> <p>1. Control valve body2. Valve body wiring harness3. O-ring4. Plug5. Cable terminal6. Retaining clip7. Input speed sensor8. Cap screw9. Pressure control valve (EDS valve)10. Cap screw11. Fixing plate12. Fixing plate13. Cap screw14. Pressure control valve (EDS valve)15. Solenoid valve</p>

Recommended

View more >