isoupdate october 2016 - unms.sk ?· ISO 22975-1:2016 Solar energy — Collector components and materials…

  • Published on
    23-Jul-2018

  • View
    212

  • Download
    0

Transcript

  • Standards published

    New International Standards published between 01 September and 30 September 2016

    * Available in English only

    ** French version of standard previously published in English only

    Price group

    IIW International Institute of Welding

    ISO 14272:2016

    Resistance welding Destructive testing of welds Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds

    B

    TC 6 Paper, board and pulps

    ISO 2470-1:2016

    Paper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness)

    B

    TC 8 Ships and marine technology

    ISO 19356:2016 * Ships and marine technology Marine cranes Test specifications and procedures A

    ISO 22472:2016 * Ships and marine technology Guidelines for the operation and installation of voyage data recorder (VDR)

    F

    TC 10 Technical product documentation

    ISO 9177-1:2016

    Mechanical pencils for technical drawings Part 1: Classification, dimensions, perfor-mance requirements and testing

    B

    TC 20 Aircraft and space vehicles

    ISO 17851:2016 * Space systems Space environment simulation for material tests General principles and criteria

    D

    TC 21 Equipment for fire protection and fire fighting

    ISO 14520-2:2016 * Gaseous fire-extinguishing systems Physical properties and system design Part 2: CF3I extinguishant

    A

    ISO 14520-5:2016 * Gaseous fire-extinguishing systems Physical properties and system design Part 5: FK-5-1-12 extinguishant

    B

    ISO 14520-6:2016 * Gaseous fire-extinguishing systems Physical properties and system design Part 6: HCFC Blend A extinguishant

    B

  • ISO 14520-8:2016 * Gaseous fire-extinguishing systems Physical properties and system design Part 8: HFC 125 extinguishant

    B

    ISO 14520-9:2016 * Gaseous fire-extinguishing systems Physical properties and system design Part 9: HFC 227ea extinguishant

    B

    ISO 14520-10:2016 * Gaseous fire-extinguishing systems Physical properties and system design Part 10: HFC 23 extinguishant

    B

    ISO 14520-11:2016 * Gaseous fire-extinguishing systems Physical properties and system design Part 11: HFC 236fa extinguishant

    B

    TC 22 Road vehicles

    ISO 19365:2016 * Passenger cars Validation of vehicle dynamic simulation Sine with dwell stability con-trol testing

    B

    TC 28 Petroleum products and related products of synthetic or biological origin

    ISO 3924:2016

    Petroleum products Determination of boiling range distribution Gas chromatography method

    D

    TC 29 Small tools

    ISO 8051:2016

    Long shank taps with nominal diameters from M3 to M10 Full-diameter shank taps with recess

    A

    ISO 10898:2016

    Spot drills A

    TC 34 Food products

    ISO 12824:2016

    Royal jelly Specifications E

    TC 38 Textiles

    ISO 1144:2016

    Textiles Universal system for designating linear density (Tex System) B

    TC 44 Welding and allied processes

    ISO 3677:2016

    Filler metal for soldering and brazing Designation A

    ISO 17672:2016

    Brazing Filler metals D

    ISO 20168:2016

    Resistance welding Locking tapers for electrode holders and electrode caps A

    TC 45 Rubber and rubber products

    ISO 1827:2016

    Rubber, vulcanized or thermoplastic Determination of shear modulus and adhesion to rigid plates Quadruple-shear methods

    B

    ISO 6235:2016

    Rubber, raw Determination of block polystyrene content Ozonolysis method

  • A

    ISO 2286-1:2016

    Rubber- or plastics-coated fabrics Determination of roll characteristics Part 1: Meth-ods for determination of length, width and net mass

    A

    ISO 2286-2:2016

    Rubber- or plastics-coated fabrics Determination of roll characteristics Part 2: Meth-ods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate

    A

    ISO 2286-3:2016

    Rubber- or plastics-coated fabrics Determination of roll characteristics Part 3: Method for determination of thickness

    A

    TC 61 Plastics

    ISO 11469:2016

    Plastics Generic identification and marking of plastics products A

    ISO 11357-1:2016

    Plastics Differential scanning calorimetry (DSC) Part 1: General principles E

    TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

    ISO 14224:2016 * Petroleum, petrochemical and natural gas industries Collection and exchange of reliabil-ity and maintenance data for equipment

    H

    ISO 16961:2015

    Petroleum, petrochemical and natural gas industries Internal coating and lining of steel storage tanks

    F

    ISO 20088-1:2016 * Determination of the resistance to cryogenic spillage of insulation materials Part 1: Liquid phase

    D

    TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use

    ISO 8536-13:2016

    Infusion equipment for medical use Part 13: Graduated flow regulators for single use with fluid contact

    A

    TC 83 Sports and other recreational facilities and equipment

    ISO 23537-1:2016

    Requirements for sleeping bags Part 1: Thermal and dimensional requirements D

    ISO 23537-2:2016

    Requirements for sleeping bags Part 2: Fabric and material properties A

    TC 85 Nuclear energy, nuclear technologies, and radiological protection

    ISO 16645:2016 * Radiological protection Medical electron accelerators Requirements and recommen-dations for shielding design and evaluation

    G

    TC 87 Cork

    ISO 2190:2016

    Granulated cork Determination of moisture content A

    TC 92 Fire safety

  • ISO/TS 19700:2016 * Controlled equivalence ratio method for the determination of hazardous components of fire effluents Steady-state tube furnace

    F

    TC 94 Personal safety -- Protective clothing and equipment

    ISO/TS 16975-2:2016

    Respiratory protective devices Selection, use and maintenance Part 2: Condensed guidance to establishing and implementing a respiratory protective device programme

    C

    TC 96 Cranes

    ISO 4302:2016

    Cranes Wind load assessment D

    TC 106 Dentistry

    ISO 17509:2016

    Dentistry Torque transmitter for handpieces A

    TC 107 Metallic and other inorganic coatings

    ISO 19207:2016

    Thermal spraying Classification method of adhesive strength by indentation C

    ISO 19477:2016

    Metallic and other inorganic coatings Measurement of Young's modulus of thermal barri-er coatings by beam bending

    C

    TC 108 Mechanical vibration, shock and condition monitoring

    ISO 10815:2016

    Mechanical vibration Measurement of vibration generated internally in railway tunnels by the passage of trains

    D

    ISO/TS 14837-32:2015

    Mechanical vibration Ground-borne noise and vibration arising from rail systems Part 32: Measurement of dynamic properties of the ground

    G

    TC 110 Industrial trucks

    ISO 10896-7:2016 * Rough-terrain trucks Safety requirements and verification Part 7: Longitudinal load moment systems

    B

    TC 113 Hydrometry

    ISO 6420:2016 * Hydrometry Position fixing equipment for hydrometric boats B

    TC 121 Anaesthetic and respiratory equipment

    ISO 5366:2016

    Anaesthetic and respiratory equipment Tracheostomy tubes and connectors D

    TC 123 Plain bearings

    ISO 12131-2:2016 * Plain bearings Hydrodynamic plain thrust pad bearings under steady-state conditions Part 2: Functions for the calculation of thrust pad bearings

    B

    ISO 12167-1:2016 * Plain bearings Hydrostatic plain journal bearings with drainage grooves under steady-state conditions Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves

    E

    ISO 20054:2016 * Plain bearings Bearings containing dispersed solid lubricants

  • B

    TC 127 Earth-moving machinery

    ISO 9244:2008/Amd 1:2016

    Earth-moving machinery Machine safety labels General principles Amendment 1

    XZ

    TC 131 Fluid power systems

    ISO 1219-3:2016 * Fluid power systems and components Graphical symbols and circuit diagrams Part 3: Symbol modules and connected symbols in circuit diagrams

    D

    ISO/TS 11672:2016 * Connectors for fluid power and general use Designation and nomenclature C

    TC 150 Implants for surgery

    ISO 13779-6:2015

    Implants for surgery Hydroxyapatite Part 6: Powders B

    ISO 7206-2:2011/Amd 1:2016

    Implants for surgery Partial and total hip joint prostheses Part 2: Articulating surfaces made of metallic, ceramic and plastics materials Amendment 1

    XZ

    ISO 7206-12:2016

    Implants for surgery Partial and total hip joint prostheses Part 12: Deformation test method for acetabular shells

    B

    ISO 14242-2:2016

    Implants for surgery Wear of total hip-joint prostheses Part 2: Methods of measure-ment

    A

    ISO 14243-2:2016

    Implants for surgery Wear of total knee-joint prostheses Part 2: Methods of measure-ment

    A

    TC 159 Ergonomics

    ISO 6385:2016

    Ergonomics principles in the design of work systems C

    TC 164 Mechanical testing of metals

    ISO 27306:2016 * Metallic materials Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components

    F

    TC 165 Timber structures

    ISO 18402:2016 * Timber structures Structural insulated panel roof construction Test methods D

    TC 172 Optics and photonics

    ISO 10938:2016

    Ophthalmic optics Chart displays for visual acuity measurement Printed, projected and electronic

    A

    ISO 11381:2016

    Ophthalmic optics Spectacle frames Screw threads A

    TC 180 Solar energy

  • ISO 22975-1:2016

    Solar energy Collector components and materials Part 1: Evacuated tubes Durabil-ity and performance

    E

    ISO 22975-2:2016

    Solar energy Collector components and materials Part 2: Heat-pipes for solar thermal application Durability and performance

    D

    TC 182 Geotechnics

    ISO 22477-10:2016 * Geotechnical investigation and testing Testing of geotechnical structures Part 10: Testing of piles: rapid load testing

    D

    TC 184 Automation systems and integration

    ISO 8000-100:2016 * Data quality Part 100: Master data: Exchange of characteristic data: Overview C

    ISO 8000-120:2016 * Data quality Part 120: Master data: Exchange of characteristic data: Provenance D

    ISO 8000-130:2016 * Data quality Part 130: Master data: Exchange of characteristic data: Accuracy B

    ISO 8000-140:2016 * Data quality Part 140: Master data: Exchange of characteristic data: Completeness B

    TC 199 Safety of machinery

    ISO/TR 22100-3:2016 * Safety of machinery Relationship with ISO 12100 Part 3: Implementation of ergonom-ic principles in safety standards

    F

    TC 201 Surface chemical analysis

    ISO 15471:2016 * Surface chemical analysis Auger electron spectroscopy Description of selected in-strumental performance parameters

    A

    ISO 17973:2016 * Surface chemical analysis Medium-resolution Auger electron spectrometers Calibra-tion of energy scales for elemental analysis

    B

    TC 204 Intelligent transport systems

    ISO 18495-1:2016 * Intelligent transport systems Commercial freight Automotive visibility in the distribution supply chain Part 1: Architecture and data definitions

    D

    ISO 19079:2016 * Intelligent transport systems Communications access for land mobiles (CALM) 6LoWPAN networking

    D

    TC 206 Fine ceramics

    ISO 18610:2016 * Fine ceramics (advanced ceramics, advanced technical ceramics) Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure Determina-tion of elastic properties by ultrasonic technique

    D

    TC 209 Cleanrooms and associated controlled environments

    ISO 14644-14:2016

    Cleanrooms and associated controlled environments Part 14: Assessment of suitability for use of equipment by airborne particle concentration

    D

    TC 211 Geographic information/Geomatics

  • ISO 19104:2016 * Geographic information Terminology H

    ISO 19160-1:2015

    Addressing Part 1: Conceptual model G

    TC 213 Dimensional and geometrical product specifications and verification

    ISO 10360-12:2016

    Geometrical product specifications (GPS) Acceptance and reverification tests for coordi-nate measuring systems (CMS) Part 12: Articulated arm coordinate measurement ma-chines (CMM)

    F

    ISO 18391:2016

    Geometrical product specifications (GPS) Population specification C

    TC 215 Health informatics

    ISO/IEEE 11073-10418:2014/Cor 1:2016

    * Health informatics Personal health device communication Part 10418: Device special-ization International Normalized Ratio (INR) monitor Technical Corrigendum 1

    free

    TC 220 Cryogenic vessels

    ISO 21028-1:2016

    Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C

    B

    TC 228 Tourism and related services

    ISO 17679:2016 * Tourism and related services Wellness spa Service requirements C

    TC 229 Nanotechnologies

    ISO/TR 16196:2016 * Nanotechnologies Compilation and description of sample preparation and dosing meth-ods for engineered and manufactured nanomaterials

    C

    TC 244 Industrial furnaces and associated processing equipment

    ISO 13577-1:2016 * Industrial furnaces and associated processing equipment Safety Part 1: General re-quirements

    F

    ISO 13577-3:2016 * Industrial furnaces and associated processing equipment Safety Part 3: Generation and use of protective and reactive atmosphere gases

    G

    TC 257 Evaluation of energy savings

    ISO 17743:2016

    Energy savings Definition of a methodological framework applicable to calculation and reporting on energy savings

    C

    TC 266 Biomimetics

    ISO 18457:2016 * Biomimetics Biomimetic materials, structures and components F

    TC 274 Light and lighting

    ISO/CIE 11664-5:2016

    Colorimetry Part 5: CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram

    B

    TC 299 Robotics

  • ISO 18646-1:2016

    Robotics Performance criteria and related test methods for service robots Part 1: Locomotion for wheeled robots

    C

    JTC 1 Information technology

    ISO/IEC TS 33072:2016 * Information technology Process assessment Process capability assessment model for information security management

    H

    ISO/IEC 27036-4:2016 * Information technology Security techniques Information security for supplier relation-ships Part 4: Guidelines for security of cloud services

    D

    ISO/IEC 23003-3:2012/Cor 3:2015

    * Information technology MPEG audio technologies Part 3: Unified speech and audio coding Technical Corrigendum 3

    free

    ISO/IEC 15459-1:2014 * Information technology Automatic identification and data capture techniques Unique identification Part 1: Individual transport units

    B

    ISO/IEC 15459-4:2014 * Information technology Automatic identification and data capture techniques Unique identification Part 4: Individual products and product packages

    B

    ISO/IEC 15459-5:2014 * Information technology Automatic identification and data capture techniques Unique identification Part 5: Individual returnable transport items (RTIs)

    B

    ISO/IEC 15459-6:2014 * Information technology Automatic identification and data capture techniques Unique identification Part 6: Groupings

    B

    ISO/IEC 9995-9:2016

    Information technology Keyboard layouts for text and office systems Part 9: Multi-lingual, multiscript keyboard layouts

    H

    ISO/IEC 19794-5:2005 * Information technology Biometric data interchange formats Part 5: Face image data H

    ISO/IEC 29794-1:2016 * Information technology Biometric sample quality Part 1: Framework D

    ISO/IEC 19086-1:2016 * Information technology Cloud computing Service level agreement (SLA) framework Part 1: Overview and concepts

    E

    ISO/IEC TR 30132-1:2016 * Information technology Information technology sustainability Energy efficient compu-ting models Part 1: Guidelines for energy effectiveness evaluation

    D

    ISO/IEC TR 38504:2016 * Governance of information technology Guidance for principles-based standards in the governance of information technology

    B

  • Standards confirmed

    The following International Standards are confimred for a five year period:

    TC 4 Rolling bearings

    ISO/TS 16281:2008 (reconfirmed)

    ISO 20516:2007 (reconfirmed)

    TC 6 Paper, board and pulps

    ISO 5350-3:2007 (reconfirmed)

    ISO 10376:2011

    ISO 17812:2007 (reconfirmed)

    TC 20 Aircraft and space vehicles

    ISO 2315:1980 (reconfirmed)

    ISO 8056-1:1985 (reconfirmed)

    ISO 11893:2011

    ISO 17566:2011

    TC 23 Tractors and machinery for agriculture and forestry

    ISO 11783-11:2011

    ISO 11783-13:2011

    TC 24 Particle characterization including sieving

    ISO 13318-2:2007 (reconfirmed)

    ISO 13319:2007 (reconfirmed)

    ISO 13322-2:2006 (reconfirmed)

    ISO 14488:2007 (reconfirmed)

    ISO 14887:2000 (reconfirmed)

    ISO 15901-2:2006 (reconfirmed)

    TC 29 Small tools

    ISO 3002-5:1989 (reconfirmed)

    ISO 13399-1:2006 (reconfirmed)

    ISO 297:1988 (reconfirmed)

    ISO 1080:1975 (reconfirmed)

    ISO 5415:2007 (reconfirmed)

    ISO 7388-1:2007 (reconfirmed)

  • ISO 7388-2:2007 (reconfirmed)

    ISO 8486-1:1996 (reconfirmed)

    ISO 15635:2001 (reconfirmed)

    ISO 16057:2002 (reconfirmed)

    ISO 21948:2001 (reconfirmed)

    ISO 21949:2001 (reconfirmed)

    ISO 21950:2001 (reconfirmed)

    ISO 21951:2001 (reconfirmed)

    TC 33 Refractories

    ISO 20182:2008 (reconfirmed)

    ISO 21078-1:2008 (reconfirmed)

    ISO 26845:2008 (reconfirmed)

    TC 34 Food products

    ISO 3720:2011

    ISO 11287:2011

    ISO 5510:1984 (reconfirmed)

    ISO 6490-1:1985 (reconfirmed)

    ISO 6493:2000 (reconfirmed)

    ISO 6866:1985 (reconfirmed)

    ISO 6867:2000 (reconfirmed)

    ISO 7088:1981 (reconfirmed)

    ISO 14181:2000 (reconfirmed)

    ISO 14565:2000 (reconfirmed)

    TC 38 Textiles

    ISO 9073-9:2008 (reconfirmed)

    ISO 9073-16:2007 (reconfirmed)

    ISO 2:1973 (reconfirmed)

    TC 41 Pulleys and belts (including veebelts)

    ISO 22721:2007 (reconfirmed)

    TC 43 Acoustics

    ISO/TS 13473-4:2008

    TC 44 Welding and allied processes

    ISO 865:1981 (reconfirmed)

    ISO 1089:1980 (reconfirmed)

    ISO 5184:1979 (reconfirmed)

    ISO 5828:2001 (reconfirmed)

    ISO 5829:1984 (reconfirmed)

    ISO 5830:1984 (reconfirmed)

  • ISO 6210-1:1991 (reconfirmed)

    ISO 7286:1986 (reconfirmed)

    ISO 7931:1985 (reconfirmed)

    ISO 15609-5:2011

    ISO 17654:2011

    TC 45 Rubber and rubber products

    ISO 188:2011

    TC 60 Gears

    ISO 54:1996 (reconfirmed)

    ISO 678:1976 (reconfirmed)

    ISO 21771:2007 (reconfirmed)

    TC 61 Plastics

    ISO 62:2008 (reconfirmed)

    ISO 291:2008 (reconfirmed)

    ISO 2578:1993 (reconfirmed)

    ISO 10640:2011

    ISO 16869:2008 (reconfirmed)

    ISO 22196:2011

    ISO 294-3:2002 (reconfirmed)

    ISO 1209-1:2007 (reconfirmed)

    ISO 8873-1:2006

    ISO 8873-2:2007

    ISO 20393:2007 (reconfirmed)

    TC 83 Sports and other recreational facilities and equipment

    ISO 7794:2011

    ISO 10228:2011

    TC 85 Nuclear energy, nuclear technologies, and radiological protection

    ISO 11933-3:1998 (reconfirmed)

    ISO 20785-2:2011

    TC 89 Wood-based panels

    ISO 12466-2:2007 (reconfirmed)

    TC 91 Surface active agents

    ISO 456:1973 (reconfirmed)

    ISO 457:1983 (reconfirmed)

    ISO 607:1980 (reconfirmed)

    ISO 672:1978 (reconfirmed)

    ISO 673:1981 (reconfirmed)

  • ISO 684:1974 (reconfirmed)

    ISO 685:1975 (reconfirmed)

    ISO 697:1981 (reconfirmed)

    ISO 862:1984 (reconfirmed)

    ISO 893:1989 (reconfirmed)

    ISO 894:1977 (reconfirmed)

    ISO 895:1977 (reconfirmed)

    TC 94 Personal safety -- Protective clothing and equipment

    ISO/TS 16976-7:2013

    ISO/TS 16976-8:2013

    TC 106 Dentistry

    ISO 9917-1:2007 (reconfirmed)

    ISO 10451:2010

    TC 107 Metallic and other inorganic coatings

    ISO 9588:2007 (reconfirmed)

    TC 108 Mechanical vibration, shock and condition monitoring

    ISO 5349-1:2001 (reconfirmed)

    ISO 5349-2:2001 (reconfirmed)

    ISO 9996:1996 (reconfirmed)

    ISO 10227:1996 (reconfirmed)

    ISO 13091-1:2001 (reconfirmed)

    ISO 15230:2007 (reconfirmed)

    ISO 18436-1:2012

    TC 113 Hydrometry

    ISO 3846:2008 (reconfirmed)

    TC 118 Compressors and pneumatic tools, machines and equipment

    ISO 28927-10:2011

    TC 126 Tobacco and tobacco products

    ISO/TS 7821:2005 (reconfirmed)

    TC 127 Earth-moving machinery

    ISO 3411:2007 (reconfirmed)

    ISO 5353:1995 (reconfirmed)

    ISO 11112:1995 (reconfirmed)

    ISO 4510-1:1987 (reconfirmed)

    ISO 6012:1997 (reconfirmed)

    ISO 6302:1993 (reconfirmed)

    ISO 7129:1997 (reconfirmed)

  • ISO 7852:1983 (reconfirmed)

    ISO 8152:1984 (reconfirmed)

    ISO 8925:1989 (reconfirmed)

    ISO 9247:1990 (reconfirmed)

    ISO 15143-1:2010

    ISO/TS 15998-2:2012

    ISO 22448:2010

    TC 130 Graphic technology

    ISO 12640-4:2011

    TC 134 Fertilizers and soil conditioners

    ISO 7837:1992 (reconfirmed)

    TC 138 Plastics pipes, fittings and valves for the transport of fluids

    ISO 18373-2:2008 (reconfirmed)

    TC 145 Graphical symbols

    ISO 3864-1:2011

    TC 147 Water quality

    ISO 5667-13:2011

    ISO 5667-23:2011

    TC 150 Implants for surgery

    ISO 7206-1:2008 (reconfirmed)

    ISO 7207-2:2011

    ISO 5835:1991 (reconfirmed)

    TC 156 Corrosion of metals and alloys

    ISO 8565:2011

    ISO 11846:1995 (reconfirmed)

    TC 163 Thermal performance and energy use in the built environment

    ISO 18292:2011

    TC 164 Mechanical testing of metals

    ISO 13314:2011

    TC 172 Optics and photonics

    ISO 9211-3:2008 (reconfirmed)

    TC 184 Automation systems and integration

    ISO/TS 10303-436:2006 (reconfirmed)

    TC 190 Soil quality

    ISO 11464:2006 (reconfirmed)

    ISO 18287:2006 (reconfirmed)

  • ISO 22892:2006 (reconfirmed)

    TC 201 Surface chemical analysis

    ISO 28600:2011

    TC 206 Fine ceramics

    ISO 10677:2011

    ISO 13124:2011

    ISO 15490:2008 (reconfirmed)

    TC 207 Environmental management

    ISO 14040:2006 (reconfirmed)

    ISO 14044:2006 (reconfirmed)

    TC 209 Cleanrooms and associated controlled environments

    ISO 14644-4:2001 (reconfirmed)

    TC 211 Geographic information/Geomatics

    ISO 19132:2007 (reconfirmed)

    TC 213 Dimensional and geometrical product specifications and verification

    ISO 8015:2011

    ISO/TS 8062-2:2013

    ISO 10360-7:2011

    ISO 14253-2:2011

    ISO 14253-3:2011

    ISO 16610-21:2011

    ISO/TS 17863:2013

    ISO/TS 23165:2006 (reconfirmed)

    TC 219 Floor coverings

    ISO 10965:2011

    TC 220 Cryogenic vessels

    ISO 21011:2008 (reconfirmed)

    ISO 21013-2:2007 (reconfirmed)

    TC 221 Geosynthetics

    ISO 10769:2011

    ISO 10773:2011

    TC 226 Materials for the production of primary aluminium

    ISO 2828:1973 (reconfirmed)

    ISO 2829:1973 (reconfirmed)

    ISO 2830:1973 (reconfirmed)

    ISO 2865:1973 (reconfirmed)

  • ISO 2927:1973 (reconfirmed)

    ISO 6999:1983 (reconfirmed)

    ISO 15906:2007 (reconfirmed)

    ISO 21687:2007 (reconfirmed)

    TC 256 Pigments, dyestuffs and extenders

    ISO 3262-12:2001 (reconfirmed)

    ISO 3262-22:2001 (reconfirmed)

    TC 292 Security and resilience

    ISO 28003:2007 (reconfirmed)

    JTC 1 Information technology

    ISO/IEC 16262:2011

    ISO/IEC 10995:2011

    ISO/IEC 12862:2011

    ISO/IEC 7942-3:1999 (reconfirmed)

    ISO/IEC 7942-4:1998 (reconfirmed)

    ISO/IEC 8632-1:1999 (reconfirmed)

    ISO/IEC 8632-3:1999 (reconfirmed)

    ISO/IEC 8632-4:1999 (reconfirmed)

    ISO 8651-1:1988 (reconfirmed)

    ISO 8651-2:1988 (reconfirmed)

    ISO 8651-3:1988 (reconfirmed)

    ISO/IEC 8651-4:1995 (reconfirmed)

    ISO 8805:1988 (reconfirmed)

    ISO/IEC 9593-1:1990 (reconfirmed)

    ISO/IEC 9593-3:1990 (reconfirmed)

    ISO/IEC 9593-4:1991 (reconfirmed)

    ISO/IEC 9636-1:1991 (reconfirmed)

    ISO/IEC 9636-2:1991 (reconfirmed)

    ISO/IEC 9636-3:1991 (reconfirmed)

    ISO/IEC 9636-4:1991 (reconfirmed)

    ISO/IEC 9636-5:1991 (reconfirmed)

    ISO/IEC 9636-6:1991 (reconfirmed)

    ISO/IEC 10641:1993 (reconfirmed)

    ISO/IEC 12087-1:1995 (reconfirmed)

    ISO/IEC 12087-3:1995 (reconfirmed)

    ISO/IEC 12087-5:1998 (reconfirmed)

    ISO/IEC 12088-4:1995 (reconfirmed)

    ISO/IEC 14478-1:1998 (reconfirmed)

  • ISO/IEC 14478-2:1998 (reconfirmed)

    ISO/IEC 14478-3:1998 (reconfirmed)

    ISO/IEC 14478-4:1998 (reconfirmed)

    ISO/IEC 14165-115:2006 (reconfirmed)

    ISO/IEC 14165-131:2000 (reconfirmed)

    ISO/IEC 14165-211:1999 (reconfirmed)

    ISO/IEC 24702:2006 (reconfirmed)

    ISO/IEC 18050:2006 (reconfirmed)

    ISO/IEC 29103:2011

    ISO/IEC TS 13249-7:2013

    ISO/IEC 14957:2010

    ISO/IEC 19502:2005 (reconfirmed)

    ISO/IEC 19503:2005 (reconfirmed)

    ISO/IEC 19756:2011

    ISO/IEC 13066-1:2011

    ISO/IEC 19788-2:2011

    ISO/IEC 19784-4:2011

    ISO/IEC 19795-1:2006 (reconfirmed)

    ISO/IEC 19795-5:2011

    ISO/IEC 19795-7:2011

    ISO/IEC 24709-3:2011

    ISO/IEC 29109-10:2010

    Standards withdrawn

    Period from 01 September to 30 September 2016

    TC 22 Road vehicles

    ISO 8820-7:2007 (replaced by )

    TC 106 Dentistry

    ISO/TR 11175:1993 (replaced by )

    TC 184 Automation systems and integration

  • ISO/TS 8000-100:2009 (replaced by ISO 8000-100:2016)

    ISO/TS 8000-120:2009 (replaced by ISO 8000-120:2016)

    ISO/TS 8000-130:2009 (replaced by ISO 8000-130:2016)

    ISO/TS 8000-140:2009 (replaced by ISO 8000-140:2016)

    TC 208 Thermal turbines for industrial application (steam turbines, gas expansion turbines)

    ISO 14661:2000/Amd 1:2002 (replaced by )

    TC 211 Geographic information/Geomatics

    ISO/TS 19104:2008 (replaced by ISO 19104:2016)

Recommended

View more >